K Blink Hand Crank Generator Pouch Conversion –The Process (Febuary 2024)

There are slightly different after studied the details of two more pics found on line.

Which indicated that no straight pattern on the conversion.

The aim is to secure the generator with the bag by two M4 x 20 slot sink head screws and washers through the bag.

And four 12 x 18 x 0.5 washers for the sockets opening at front and back side.

Finally a big hole to extend the cranking arm at right side of the pouch and secure with a leather strap when not in use.

The D ring on the right side has to be moved to the back and the one of the belt loop has to be move 7mm to the right.

Simple hand tools are enough for the task together with a Dremel tool with 1.5mm drill bit for the stitching holes to drill through the 8mm thick wall.